My next FPV racing machine...

Here are some renderings of my latest frame concept. It has a very small frontal area and should reach high speeds. The diagonal motor distance is 210 mm and I will use 5.5 inch propellers (Graupner Race-Prop or C-prop).
















Comments

  1. Hi, I follow youy test, and wonder if adding some "tail" in addition to the nose would help aerodinamically, compensating its weight with better performance ?

    ReplyDelete
  2. Mal wieder ein sehr cooles Design!

    Ich habe eine Frage zur MM6: Hattest du eigentlich Probleme mit Vibrationen etc.? Da die Props ja doch sehr nah beieinander sind.
    Ich überlege nämlich schon seit 5 Jahren die mal nachzubauen ;)

    Gruß Stefan

    ReplyDelete
    Replies
    1. Hallo Stefan,
      Nein vibrationsprobleme hatte ich keine. Die Propeller drehen ja an den Blattspitzen in die gleiche Richtung, da sollte ein kleiner Abstand keine Probleme machen.

      Delete
    2. Okay, Danke.
      Ich hatte nämlich bei einem größeren Quad das Problem, aber der hatte auch 10" Props.
      Dann werde ich mal das zeichnen und bauen anfangen. Ich schicke dir Bilder wenn ich fertig bin. :)

      Delete
    3. This comment has been removed by the author.

      Delete
  3. This comment has been removed by the author.

    ReplyDelete
  4. Cool design! I would like too such to make.
    With what thickness of a layer the case is printed? Or it is not the FDM print?
    Whether you will share STL files of the case?

    ReplyDelete
  5. This will fly like awesomeness! Share the CAD files and save me the trouble of drawing it myself please? :)

    ReplyDelete
  6. Oh found them, thanks!

    ReplyDelete

Post a Comment

Popular posts from this blog

My 15 inch long-range setup for 2020 (with CAD files)

Part 1/3: Side Force Generators (SFGs) in FPV Racing

Finished I²C to PWM converter and TriGUIDE mini

Part 2/3: Side force generators - Forces and turning

Aerodynamics in racing multirotors!